Hiring a carpet cleaner is something that most homeowners do about once a year to have their carpets deep cleaned. The majority of carpet manufacturers recommend that you have your carpets cleaned every 12 to 18 months to keep them in top best carpet cleaner. Daily vacuuming is your best defense against dirt buildup and stains as most soiling is loose, but even with regular vacuuming most carpets still need to have the deep-set dirt cleaned out to avoid damage.
There are a few methods for deep cleaning a carpet and choosing the right carpet cleaner that specializes in the method you want done is your first step. Many professional cleaners will typically favor either the wet extraction method or the dry extraction method and you should decide which one you want before searching for a carpet cleaner. Both methods are similar in principle but vary in what they use for a cleaning agent. Both of them are about as effective in the general cleaning of a carpet and do a great job of stain removal. The choice between them is really a matter of which one your particular carpet manufacturer recommends and your preference. If you don’t have the paperwork that came with your carpet when it was installed, you can always visit the carpet manufacturer’s website to see the details of their warranty.
The hot water extraction method has been used for quite a while and is the most popular type of commercial carpet cleaning. It relies on specialized equipment that is used by the carpet cleaner and can either be a self-contained appliance or can just be the nozzle wand assembly that is connected by a set of hoses to a van outside the house that holds the truck mounted machine equipment. The carpet cleaner will typically pre-treat areas of the carpet that are particularly dirty with a topical pre-spray treatment before starting to clean a room to help remove any high-traffic dirt or stains. The carpet cleaner will then use the hot water extraction machine to clean and dry the carpet. The process involves a cleaning solution being dispensed deep into the carpet. This solution is typically heated and will instantly dissolve the adhesive bond that holds most dirt and grease to the carpet fibers. Right after this solution is injected into the carpet, it is extracted by a very powerful vacuum from the carpet to avoid leaving the water in the fibers too long. Even still, the carpet will need 4 to 6 hours of drying time before you can use the room again. These hot water extraction cleaners are also available in most home improvement stores for rent, and allow the average homeowner to clean their carpets themselves. Just be careful that if you do decide to use one of these cleaners that you don’t get the carpet too wet.